|
|
|
|
|
|
MULTI Integrated Development Environment
|
|
MULTI provides a host-based (Windows 95/NT PC or UNIX workstation) graphical environment for PowerPC target development. Host-target connectivity is provided through a variety of means, depending on the target environment. MULTI MULTI supports many SH evaluation boards from Hitachi. These boards can be accessed with a variety of interfaces.
MULTI debugger needs Servers in order to communicate with Simulator, Emulator, ROM Monitor. In other words, you can connect MULTI with various kinds of targets just by changing Servers.
|
|
|
|
MULTI debugger + Simulator+SimI/O |
|
Standard Monitor Server is provided in order to connect MULTI Source Level Debugger and GHS' ROM Monitor.
By porting ROM Monitor on the target board, it is possible to establish monitor
debugging environment.
|
|
|
|
|
|
MULTI debugger + ROM Monitor |
|
Standard Monitor Server is provided in order to connect MULTI Source Level Debugger and
GHS'ROM Monitor.By Proting ROM Monitor on the target board,it is Possible to establish monitor debugging
environment.
|
|
| Supported Processor(s) |
SH1,SH2,SH3,SH4 |
| Communication |
Serial |
|
|
|
|
MULTI debugger + Agilent's Emulation Probe
|
|
Emulator Debugging Environment: MULTI Source Level Debugger and Agilent's Emulation Probe are connected by HP Server.
|
|
| Supported Processor(s) |
SH4,SH3-DSP |
| Communication |
Ethernet |
|
|
|
|
MULTI debugger + Hitachi's E-6000 ICE |
|
Emulator Debugging Environment: MULTI Source Level Debugger and Hitachi's E-6000 ICE are connected by
E6K Server.
|
|
|
|
|
|
MULTI debugger + Hitachi's E-7000 ICE |
|
Emulator Debugging Environment:MULTI Source Level Debugger and Hitachi's E-7000 ICE are connected by
E7K Server.
|
|
|
|
|
|
MULTI debugger + Hitachi's E-8000 ICE |
|
Emulator Debugging Environment:MULTI Source Level Debugger and Hitachi's E-8000 ICE are Connected by HE Server.
|
|
|
|
|
|
MULTI debugger + YDC's ADViCE |
|
Emulator Debugging Environment:MULTI Source Level Debugger and YDC's ADViCE are connected by YDC Server.
|
|
| Supported Processor(s) |
|
| Communication |
Ethernet |
|
|
|
|
MULTI debugger+ICE server+NORTi3 |
|
It is Possible to use any ICE Server in order to have
a development environment for NORTi3 in using MULTI Source Level Debugger.By having MULTI Source
Level Debugger reads Plc file,it is posible to display resources of NORTi3(information
from TCB)when application program stops.
|
|
| Supported Processor(s) |
SH1,SH2,SH3,SH4 |
| Communication |
Depends on Server |
| Note |
Resource display of NORTi available with PLC file.
Simulator Server
Standard Monitor Server
ARM Server
HP Server
MJX Server
OCD Server
YDC Server |
|
|
|
|
MULTI debugger+NORTi3 server+{Agent+NORTi} |
|
| Supported Processor(s) |
SH1,SH2,SH3,SH4 |
| Communication |
Serial,Ethernet |
| Note |
Stop only necessary tasks(run mode)By stopping all tasks,
Resource display of NORTi is possible(stop mode)
|
|
|
|
|
MULTI debugger+ICE server+Nucleus Plus |
|
It is Possible to use any ICE Server in order to have
a development environment for NORTi3 in using MULTI Source Level Debugger.By having MULTI Source
Level Debugger reads Plc file,it is pposible to display resources of NORTi3 (information
from TCB)when application program stops.
|
|
| Supported Processor(s) |
SH1,SH2,SH3,SH4 |
| Communication |
Depends on Server |
| Host Machine |
Connection to host machine depends on which ICE/J-TAG
is used.The Servers which are available for this environment are below.
Simulator Server
Standard Monitor Server
ARM Server
HP Server
MJX Server
OCD Server
YDC Server |
|
|
|
|
MULTI debugger+Customize server+Custimize Target |
|
It is Possible to connect MULTI Source Level Debugger to any target by developing a Server.
|
|
|
|
|
